IT Risk Management for Data Security- myassignmenthelp.com

Question: Discuss about theIT Risk Management for Data Security. Answer: Introduction Data security is very much vital in every aspect of living. As a result of the massive breaches in the data by major corporations with respect to every industry data security is a talk of the tech world. The impact of the data securities can be of very much importance due to the factor of economic and reputation impact it causes (Carver, Minku Penzenstadler, 2017). This factor is the main reason of a massive shift going on in the world today. The different security point features that are available such as firewalls can be of very much benefit as they not only provide security but also take action to address the threats. There can different situation where a person wants to access a data on a network drive but does not have access to it. This happens at most appropriate time and as a result of which they need to get holds of the system administrator in order to grand them the permission. Access point is basically a technique of identifying a person doing a specific task or job which can be authenticated by looking at their identification with respect to which the access can be given. Information security model can be related to methods that are used in order to authenticate security policies as they are intended to provide a precise set of rules that a computer must follow (Angst el al., 2017) Security threads and risk assessment should be incorporated when there is a developing or implementing major changes to or acquires an information system. These are the basic components of the overall risk management aspect (Karim et al., 2017) IT Security Technology Landscape In recent times the information technology security lags behind and there is a huge mismatch on what the customer expect it to give and what the security technology delivers to them. From the point of view of the customer the security should be protecting an enterprise against any thread that can cause harm to it. On the other hand the security aspects should be easy to implement as should be considered as an easy approach. The gap which is created is lagging for a long time because the security industry is more focused on the point solution creation rather than holistic answer to any aspect regarding to the security issue (Moncayo Montenegro, 2016). So, there is a massive shift of security aspect that must be deployed in order to approach and resolve the overall security aspect as well as the technology landscape. IT Security Models Access Controls The models to the It security model gives a large scale of idea about the basic rules that should be followed by a computer to in order to implement the fundamental security concepts involved in it. The basic models are stated below: State machine model: according to this model a state is a systems snapshot at a specific time incident. The state machine model derives from the computer science definition which can be related to finite state machine ( FSM), which is meant to integrate an external input with an internal machine state in order to model all the system types which may include a decoder, parser and an interpreter. The main transition takes place when accepting or producing output and this always results in a new state. Bell- Lapadula Model: this model was mainly developed in order to formulize the U.S department of defense (DoD) multi level security policy. This model classifies the resources into major four parts as unclassified, confidential, secret and top secret. The model can be implemented in such a way that an individual cleared for the security level only has access documents labeled secret. This merely means only those resources are available to the concerned person who needs access to that particular resource and not all the resource. Access point mainly deals with the permission of a particular person in order to access specific information. The access control model has mainly four aspects mandatory access control (MAC), rule and based access control (RBAC or RB-RBAC) and discretionary access control (DAC). These all model address a specific point of access to an individual. A person cannot merely access each and every point (De Smet Mayer, 2016). Only if an individuals identification credentials are valid they would be allowed to pass through the information on the data. This aspect plays a vital role in the security of the data from unwanted personals accessing them (Buttyn, Flegyhzi Pk, 2016). IT Security Threat and risk assessment IT security threat can be described as anything that would be directly contributing to the destruction, tampering or interruption of any service related aspect. Threats merely always go with vulnerability which can be graded in a similar manner which can be measured in term of capability and motivation. The vulnerability aspect analysis phase may include testing with the objectives something which can be related to value for example text file, classification document or password file (Buttyn, 2016). It should be noted that this should be pre determined with the senior management who are concerned the security aspect related to any field. The assessment of the risk plays an important role the risk can be factored in various conditions and the assessment of the risk accordingly can decrease the effect of the risk and eventually decrease it. The level of protection and maintenance would be different in different areas. The measure would directly be depending upon the size of the IT depa rtment (Loonczi, Ne?as Na?, 2016). Conclusion It can be concluded from the report that the threads and the various aspects is not a mean of end at any point. It is merely a continous process which has ones started and would continue in the near future. The risk factors should be evaluated according and necessary actions in order to minimize the risk associated with the different scenario should be identified in order to decrease the overall affect of the risk. All security devices and control are very much important but they should be framed in a large picture always. References Angst, C. M., Block, E. S., DArcy, J., Kelley, K. (2017). When do IT security investments matter? Accounting for the influence of institutional factors in the context of healthcare data breaches. MIS Quarterly. Buttyn, L. (2016). Introduction to IT Security. Buttyn, L., Flegyhzi, M., Pk, G. (2016). Mentoring Talent in IT Security-A Case Study. In ASE@ USENIX Security Symposium. Carver, J. C., Minku, L. L., Penzenstadler, B. (2017). Requirements, Human Values, and the Development Technology Landscape. IEEE Software, 34(1), 13-15. De Smet, D., Mayer, N. (2016, October). Integration of it governance and security risk management: A systematic literature review. In Information Society (i-Society), 2016 International Conference on (pp. 143-148). IEEE. Karim, N. S. A., Saba, T., Albuolayan, A. (2017). Analysis of software security model in scenario of Software Development Life Cycle (SDLC). Journal of Engineering Technology (ISSN: 0747-9964), 6(2), 304-316. Loonczi, P., Ne?as, P., Na?, N. (2016). RISK MANAGEMENT IN INFORMATION SECURITY. Journal of Management, (1), 28. Moncayo, D., Montenegro, C. (2016, October). Information security risk in SMEs: A hybrid model compatible with IFRS: Evaluation in two Ecuadorian SMEs of automotive sector. In Information Communication and Management (ICICM), International Conference on (pp. 115-120). IEEE.

IT Risk Management for Data Security- myassignmenthelp.com

Question: Discuss about theIT Risk Management for Data Security. Answer: Introduction Data security is very much vital in every aspect of living. As a result of the massive breaches in the data by major corporations with respect to every industry data security is a talk of the tech world. The impact of the data securities can be of very much importance due to the factor of economic and reputation impact it causes (Carver, Minku Penzenstadler, 2017). This factor is the main reason of a massive shift going on in the world today. The different security point features that are available such as firewalls can be of very much benefit as they not only provide security but also take action to address the threats. There can different situation where a person wants to access a data on a network drive but does not have access to it. This happens at most appropriate time and as a result of which they need to get holds of the system administrator in order to grand them the permission. Access point is basically a technique of identifying a person doing a specific task or job which can be authenticated by looking at their identification with respect to which the access can be given. Information security model can be related to methods that are used in order to authenticate security policies as they are intended to provide a precise set of rules that a computer must follow (Angst el al., 2017) Security threads and risk assessment should be incorporated when there is a developing or implementing major changes to or acquires an information system. These are the basic components of the overall risk management aspect (Karim et al., 2017) IT Security Technology Landscape In recent times the information technology security lags behind and there is a huge mismatch on what the customer expect it to give and what the security technology delivers to them. From the point of view of the customer the security should be protecting an enterprise against any thread that can cause harm to it. On the other hand the security aspects should be easy to implement as should be considered as an easy approach. The gap which is created is lagging for a long time because the security industry is more focused on the point solution creation rather than holistic answer to any aspect regarding to the security issue (Moncayo Montenegro, 2016). So, there is a massive shift of security aspect that must be deployed in order to approach and resolve the overall security aspect as well as the technology landscape. IT Security Models Access Controls The models to the It security model gives a large scale of idea about the basic rules that should be followed by a computer to in order to implement the fundamental security concepts involved in it. The basic models are stated below: State machine model: according to this model a state is a systems snapshot at a specific time incident. The state machine model derives from the computer science definition which can be related to finite state machine ( FSM), which is meant to integrate an external input with an internal machine state in order to model all the system types which may include a decoder, parser and an interpreter. The main transition takes place when accepting or producing output and this always results in a new state. Bell- Lapadula Model: this model was mainly developed in order to formulize the U.S department of defense (DoD) multi level security policy. This model classifies the resources into major four parts as unclassified, confidential, secret and top secret. The model can be implemented in such a way that an individual cleared for the security level only has access documents labeled secret. This merely means only those resources are available to the concerned person who needs access to that particular resource and not all the resource. Access point mainly deals with the permission of a particular person in order to access specific information. The access control model has mainly four aspects mandatory access control (MAC), rule and based access control (RBAC or RB-RBAC) and discretionary access control (DAC). These all model address a specific point of access to an individual. A person cannot merely access each and every point (De Smet Mayer, 2016). Only if an individuals identification credentials are valid they would be allowed to pass through the information on the data. This aspect plays a vital role in the security of the data from unwanted personals accessing them (Buttyn, Flegyhzi Pk, 2016). IT Security Threat and risk assessment IT security threat can be described as anything that would be directly contributing to the destruction, tampering or interruption of any service related aspect. Threats merely always go with vulnerability which can be graded in a similar manner which can be measured in term of capability and motivation. The vulnerability aspect analysis phase may include testing with the objectives something which can be related to value for example text file, classification document or password file (Buttyn, 2016). It should be noted that this should be pre determined with the senior management who are concerned the security aspect related to any field. The assessment of the risk plays an important role the risk can be factored in various conditions and the assessment of the risk accordingly can decrease the effect of the risk and eventually decrease it. The level of protection and maintenance would be different in different areas. The measure would directly be depending upon the size of the IT depa rtment (Loonczi, Ne?as Na?, 2016). Conclusion It can be concluded from the report that the threads and the various aspects is not a mean of end at any point. It is merely a continous process which has ones started and would continue in the near future. The risk factors should be evaluated according and necessary actions in order to minimize the risk associated with the different scenario should be identified in order to decrease the overall affect of the risk. All security devices and control are very much important but they should be framed in a large picture always. References Angst, C. M., Block, E. S., DArcy, J., Kelley, K. (2017). When do IT security investments matter? Accounting for the influence of institutional factors in the context of healthcare data breaches. MIS Quarterly. Buttyn, L. (2016). Introduction to IT Security. Buttyn, L., Flegyhzi, M., Pk, G. (2016). Mentoring Talent in IT Security-A Case Study. In ASE@ USENIX Security Symposium. Carver, J. C., Minku, L. L., Penzenstadler, B. (2017). Requirements, Human Values, and the Development Technology Landscape. IEEE Software, 34(1), 13-15. De Smet, D., Mayer, N. (2016, October). Integration of it governance and security risk management: A systematic literature review. In Information Society (i-Society), 2016 International Conference on (pp. 143-148). IEEE. Karim, N. S. A., Saba, T., Albuolayan, A. (2017). Analysis of software security model in scenario of Software Development Life Cycle (SDLC). Journal of Engineering Technology (ISSN: 0747-9964), 6(2), 304-316. Loonczi, P., Ne?as, P., Na?, N. (2016). RISK MANAGEMENT IN INFORMATION SECURITY. Journal of Management, (1), 28. Moncayo, D., Montenegro, C. (2016, October). Information security risk in SMEs: A hybrid model compatible with IFRS: Evaluation in two Ecuadorian SMEs of automotive sector. In Information Communication and Management (ICICM), International Conference on (pp. 115-120). IEEE.

IT Risk Management for Data Security- myassignmenthelp.com

Question: Discuss about theIT Risk Management for Data Security. Answer: Introduction Data security is very much vital in every aspect of living. As a result of the massive breaches in the data by major corporations with respect to every industry data security is a talk of the tech world. The impact of the data securities can be of very much importance due to the factor of economic and reputation impact it causes (Carver, Minku Penzenstadler, 2017). This factor is the main reason of a massive shift going on in the world today. The different security point features that are available such as firewalls can be of very much benefit as they not only provide security but also take action to address the threats. There can different situation where a person wants to access a data on a network drive but does not have access to it. This happens at most appropriate time and as a result of which they need to get holds of the system administrator in order to grand them the permission. Access point is basically a technique of identifying a person doing a specific task or job which can be authenticated by looking at their identification with respect to which the access can be given. Information security model can be related to methods that are used in order to authenticate security policies as they are intended to provide a precise set of rules that a computer must follow (Angst el al., 2017) Security threads and risk assessment should be incorporated when there is a developing or implementing major changes to or acquires an information system. These are the basic components of the overall risk management aspect (Karim et al., 2017) IT Security Technology Landscape In recent times the information technology security lags behind and there is a huge mismatch on what the customer expect it to give and what the security technology delivers to them. From the point of view of the customer the security should be protecting an enterprise against any thread that can cause harm to it. On the other hand the security aspects should be easy to implement as should be considered as an easy approach. The gap which is created is lagging for a long time because the security industry is more focused on the point solution creation rather than holistic answer to any aspect regarding to the security issue (Moncayo Montenegro, 2016). So, there is a massive shift of security aspect that must be deployed in order to approach and resolve the overall security aspect as well as the technology landscape. IT Security Models Access Controls The models to the It security model gives a large scale of idea about the basic rules that should be followed by a computer to in order to implement the fundamental security concepts involved in it. The basic models are stated below: State machine model: according to this model a state is a systems snapshot at a specific time incident. The state machine model derives from the computer science definition which can be related to finite state machine ( FSM), which is meant to integrate an external input with an internal machine state in order to model all the system types which may include a decoder, parser and an interpreter. The main transition takes place when accepting or producing output and this always results in a new state. Bell- Lapadula Model: this model was mainly developed in order to formulize the U.S department of defense (DoD) multi level security policy. This model classifies the resources into major four parts as unclassified, confidential, secret and top secret. The model can be implemented in such a way that an individual cleared for the security level only has access documents labeled secret. This merely means only those resources are available to the concerned person who needs access to that particular resource and not all the resource. Access point mainly deals with the permission of a particular person in order to access specific information. The access control model has mainly four aspects mandatory access control (MAC), rule and based access control (RBAC or RB-RBAC) and discretionary access control (DAC). These all model address a specific point of access to an individual. A person cannot merely access each and every point (De Smet Mayer, 2016). Only if an individuals identification credentials are valid they would be allowed to pass through the information on the data. This aspect plays a vital role in the security of the data from unwanted personals accessing them (Buttyn, Flegyhzi Pk, 2016). IT Security Threat and risk assessment IT security threat can be described as anything that would be directly contributing to the destruction, tampering or interruption of any service related aspect. Threats merely always go with vulnerability which can be graded in a similar manner which can be measured in term of capability and motivation. The vulnerability aspect analysis phase may include testing with the objectives something which can be related to value for example text file, classification document or password file (Buttyn, 2016). It should be noted that this should be pre determined with the senior management who are concerned the security aspect related to any field. The assessment of the risk plays an important role the risk can be factored in various conditions and the assessment of the risk accordingly can decrease the effect of the risk and eventually decrease it. The level of protection and maintenance would be different in different areas. The measure would directly be depending upon the size of the IT depa rtment (Loonczi, Ne?as Na?, 2016). Conclusion It can be concluded from the report that the threads and the various aspects is not a mean of end at any point. It is merely a continous process which has ones started and would continue in the near future. The risk factors should be evaluated according and necessary actions in order to minimize the risk associated with the different scenario should be identified in order to decrease the overall affect of the risk. All security devices and control are very much important but they should be framed in a large picture always. References Angst, C. M., Block, E. S., DArcy, J., Kelley, K. (2017). When do IT security investments matter? Accounting for the influence of institutional factors in the context of healthcare data breaches. MIS Quarterly. Buttyn, L. (2016). Introduction to IT Security. Buttyn, L., Flegyhzi, M., Pk, G. (2016). Mentoring Talent in IT Security-A Case Study. In ASE@ USENIX Security Symposium. Carver, J. C., Minku, L. L., Penzenstadler, B. (2017). Requirements, Human Values, and the Development Technology Landscape. IEEE Software, 34(1), 13-15. De Smet, D., Mayer, N. (2016, October). Integration of it governance and security risk management: A systematic literature review. In Information Society (i-Society), 2016 International Conference on (pp. 143-148). IEEE. Karim, N. S. A., Saba, T., Albuolayan, A. (2017). Analysis of software security model in scenario of Software Development Life Cycle (SDLC). Journal of Engineering Technology (ISSN: 0747-9964), 6(2), 304-316. Loonczi, P., Ne?as, P., Na?, N. (2016). RISK MANAGEMENT IN INFORMATION SECURITY. Journal of Management, (1), 28. Moncayo, D., Montenegro, C. (2016, October). Information security risk in SMEs: A hybrid model compatible with IFRS: Evaluation in two Ecuadorian SMEs of automotive sector. In Information Communication and Management (ICICM), International Conference on (pp. 115-120). IEEE.

Enzyme Activity Ia Essay Example

Enzyme Activity Ia Essay Year 11 IB Biology IA Report 2011 5/31/2011 Enzyme Activity Experiment Introduction3 AIM3 Materials3 Method4 Result5 Table 1:5 Table 2:5 Graph 16 Discussion6 Conclusion8 Bibliography9 Appendix 1 (Test tube 3- 45 degrees)9 Appendix 2 (Test tube 1- 5 degrees)9 Appendix 3 (Test tube 2- 20 degrees)9 Introduction Phenolphthalein is an indicator that is pink in alkaline solutions of about pH10. When the pH drops below pH 8. 3 phenolphthalein will go colourless. Here, an alkaline solution of milk, lipase and phenolphthalein will change from pink to colourless as the fat in milk is broken down to form fatty acids (and glycerol) thus reducing the pH to below 8. 3. The time taken for this reaction to occur is affected by temperature. AIM To investigate the effects of increasing temperature on the activity of enzyme Lipase. Materials * Milk, full-fat or semi-skimmed, 5 cm3 per student per temperature assessed * Phenolphthalein in a dropper bottle (see note 1) * 5% lipase solution, 1 cm3 per student per temperature assessed * Sodium carbonate solution, 0. 05 mol dm-3, 7 cm3 per student per temperature assessed * Electric hot water baths set to a range of temperatures, each containing a thermometer, a test-tube rack and a beaker of lipase solution. * Ice * Marker pen * Test tube rack * Measuring cylinder (or syringe), 10 cm3, 2 * Beaker, 100 cm3, 2 (for milk and sodium carbonate solution) * Beaker, 250 cm3, 2 (to act as water baths for temperatures below room temperature) * Thermometer * Test tube * Glass rod * Syringe, 2 cm3 * Stop clock/stopwatch Method 1. We will write a custom essay sample on Enzyme Activity Ia specifically for you for only $16.38 $13.9/page Order now We will write a custom essay sample on Enzyme Activity Ia specifically for you FOR ONLY $16.38 $13.9/page Hire Writer We will write a custom essay sample on Enzyme Activity Ia specifically for you FOR ONLY $16.38 $13.9/page Hire Writer Label a test tube with the temperature to be investigated. 2. Add 5 drops of phenolphthalein to the test tube. 3. Measure out 5 cm3 of milk using a measuring cylinder (or syringe) and add this to the test tube. 4. Measure out 7 cm3 of sodium carbonate solution using another measuring cylinder (or syringe) and add this to the test tube. The solution should be pink. 5. Place a thermometer in the test tube. Take care as the equipment could topple over. 6. Place the test tube in a water bath and leave until the contents reach the same temperature as the water bath. . Remove the thermometer from the test tube and replace it with a glass rod. 8. Use the 2 cm3 syringe to measure out 1 cm3 of lipase from the beaker in the water bath for the temperature you are investigating. 9. Add the lipase to the test tube and start the stopclock/ stopwatch. 10. Stir the contents of the test tube until the solution loses its pink colour. 11. Stop the clock/ watch and note the time in a suitable table of r esults. Result Table 1: | Test tube 1 5 degrees| Test tube 220 degrees| Test tube 345 degrees| Test tube 465 degrees| Time (min: sec: usec)| 31:04:86 ()| 16:26:17| 2:09:03| 32:20:74 ()| Notes| The test tube was breakdown before the liquid (milk) turns white| Complete| Complete| The liquid didn’t turn white, and colour of the liquid (Milk) was light pink| Table 2: Time (Min)| Test Tube 15 degrees| Test tube 220 degrees| Test tube 345 degrees| Test tube 465 degrees| 00:00:00| | | Light pink| | 02:00:00| | Pink | Completed| | 04:00:00| | | | Turn light pink| 06:00:00| | Light pink| | | 08:00:00| Turned light pink| | | | 10:00:00| | | | lighter| 2:00:00| | White with Pink| | | 14:00:00| Lighter| | | White with pink| 16:00:00| | Completed| | | 18:00:00| | | | | 20:00:00| | | | | 22:00:00| | | | | 24:00:00| | | | | 26:00:00| Really Light pink| | | | 28:00:00| White with pink| | | | 30:00:00| | | | | Graph 1 Discussion As the introduction of this report shown that the phenolphthalein is an indicator that is pink solution of about pH10, and when the pH drops below pH8. 3 phenol phthalein goes colourless. Through this report, the aim is to investigate the effect of increasing temperature on the activity of the enzyme lipase. The data of the experiment results showed that the sample [Test tube 1] in five degrees took around 31 minutes and 04 seconds to turns into light pink, but the testing wasn’t complete, as the test tube was break down before it completed, but record from another group’s result, it took around 50 minutes for the sample to completely turn white. (Result from Sumin’s group). The sample [Test tube 2] in 20 degrees took around 16 minutes and 26 seconds to complete the reaction and completely turned white. The sample [Test tube 3] took around 2 minutes and 09 seconds to complete the reaction and this sample took the shortest time to complete the reaction. The sample [Test tube 4] took around 32 minutes and 21 seconds to turn into very light pink (White with pink), but it didn’t complete the reaction as the time was run out. As the result, it shows that the temperature between 20 to 45 degrees is the best environment for the fat in milk to broken down to fatty acids and glycerol thus reducing the pH to below 8. and the taken time will increase if the temperature is over 45 degrees and the lipase might not break down the fat in milk or not work at all. The temperature affected the action of the fat breaks down to fatty acids and glycerol (lipase) in this way because when the temperature increase and then the time taken for the reaction will also increase by increase the collision rate between the substrate molecules and enzymes. The fastest time for the reaction is at the suitable and advantageous temperature for the enzymes which is between 20 to 45 degrees (Â ± 5 degrees). The time taken for the reaction will decrease from 5 degrees to 45 degrees, but the time will increase since the temperature is reach and over 45 degrees, as the protein structure of the enzyme will denatured by the high temperature and the enzyme is de-activated and the molecule is lose its shape. (University of Maryland Medical Center, 2009) Recording from the experiment result, the best temperature for the fat in milk breaks down to fatty acids and glycerol is between 20 to 45 degrees and it might not work really well when the temperature is over 45 degrees. On another hand, there are some weaknesses need to be improve in the experiment. Firstly, the water temperature for the Test tubes to stay in was under/ over the temperature that was suggest in the experiment as the temperature of the water was hard to control as the exactly temperature that the instruction suggested, so the group was recommend that a member from the group needs to add extra hot water/ extra ice when the temperature of the water is under/ over the temperature recommended. Secondly, the group set up and put all the test samples in the test tube at the beginning of the experiment and suddenly left the samples in the room temperature for almost 10 minutes before the group start the experiment; therefore, the results from the experiment might be wrong as the solution in the test tube might affects the lipase during the break time. As the result, the group suggest to mix up the solution and the test samples before the experiment starts, and the break time gap is not allowed. Thirdly, the syringe wasn’t used to measure out the lipase, so the group chose to restart the experiment as the results may have changed. However, after restarting the experiment as a whole, the experiment was a lot more successful and there was more care. Finally, these improvements will be use as a reference in the next class experiment. Conclusion In conclusion, the results from the experiment shown that the best temperature for the fat in milk to break down to fatty acids and glycerol is 45 degrees and the reaction will not work really well since the temperature are over 45 degrees. Also, recording from the graph, the test tube 3 (45 degrees) spent less time to complete the process and the test tube 4 (60 degrees) spent more time to turn the colour of the liquid into light pink and the process/ reaction didn’t complete in the end. As well, the information shown at the website of the University of Maryland Medical Centre displayed that the protein structure of the enzyme will denatured by the high temperature and the enzyme is deactivated and the molecule is lose its shape when the temperature is over 45 degrees. University of Maryland Medical Center, 2009). As the result, when the temperature increase from zero degrees to 45 degrees, the time taken for the reaction will decrease, but the reaction starts slow down since the temperature is reach and over 45 degrees. Bibliography University of Maryland Medical Center. (2009). Retrieved from Lipase: http://www. umm. edu/altmed/articles/lipase-000311. htm Appendix Appendix 1 (Test tube 3- 45 degrees) Appendix 2 (Test tube 1- 5 degrees) Appendix 3 (Test tube 2- 20 degrees)

How To Become A Pop Star essays

How To Become A Pop Star essays Pop music is incredibly popular. Not only can one hear bands such as the Backstreet Boys or 'N Sync playing on just about every radio station in the country, but bands such as this can be seen in toy stores in the form of "action figures," or on posters hanging on the bedroom walls of pre-pubescent girls nationwide. These pretty faces and high-pitched voices are enough to drive the average, red-blooded male up the wall and beg for the days of Led Zeppelin and ZZ Top. Despite the disdain showed by the average male towards these "talented musicians," one must give them credit for earning infinitely more money in their few short years of fame than one usually earns over the course of a lifetime. Since this is true, everyone should be allowed to know what exactly it takes to become a pop star. By carefully examining three important requirements of pop-stardom, one could easily become a pop star themselves. As unorthodox as some of these requirements may seem, they are all being fulfille d by the pop stars of today and are surely keys to instant success. If one wishes to become a pop star, the first requirement is a change in wardrobe. Simply by watching an award show such as the MTV Music Awards or the Teen Choice Awards, one can see just what type of digs it takes to make it in the world of pop-stardom. The key to popstar dress is the outlandishness of the outfit. Take AJ from the Backstreet Boys for example. You will never see this "guy" wearing a shirt with arms on it. Since he has a plethora of tattoos on both of his arms, he finds it necessary to show off his twig-like arms wherever he goes. To compliment his armless shirts, AJ chooses a large, novelty cowboy hat that would surely cripple the neck of a normal human being because of its size. However, since AJ and his "band" have been wildly successful, aspiring pop stars should hurry out to their local clothing boutiques and purchase the most ridiculous looking outfits they can f...

Contractors and Consultants Essay Example | Topics and Well Written Essays - 250 words

Contractors and Consultants - Essay Example Government contracting of tax collection services and legal services brings a set of benefits that are both economic and efficiency based. Maintaining a legal firm just to cater for government legal requirements would create an enormous financial burden on the government and in most cases lack efficiency. The government contracting for legal services ensures that the best representatives are acquired for the task at hand. Legal outsourcing is a reform resulting into a more efficient public service by the private sector (Joyce, 2013). Outsourcing of services that bear strong responsibilities to the public safety and those that can affect the Nation adversely is not morally right in the public interest. Some outsourcing activities result in moral degradation of the public while others threaten the diplomatic and safety measures of the government functioning (Joyce, 2013). Outsourcing the correction services has led to private- prison providers to push for mandatory minimum sentences and to sign contracts warranting to keep prison beds entirely filled (Joyce, 2013). This case is an example of a moral degradation where the correction system gets turned from a rehabilitation program to a financial endeavor. The case of Snowden, who worked for a private contractor, who leaked top-secret information affecting the national security is an example of why top government services should be maintained at government control (Joyce,

Proof Mayan Language Exists Research Proposal Example | Topics and Well Written Essays - 2500 words

Proof Mayan Language Exists - Research Proposal Example It also included the Yucatan Peninsula, the northwest to the Isthmus ÃŽ ¿f Tehuantepec and southwest into Honduras and El Salvador (Brainerd 7). The Maya culture had interesting aspects in their civilization or that they accomplished over time. The important aspects ÃŽ ¿f the Mayas are their physical characteristics, how they dress, their social organization, the agriculture, art and techniques, religion, god and goddesses, architecture, trade, mathematics and government. The physical characteristics ÃŽ ¿f the Maya culture are the following; they were short, long-bodied, and chunky, with good muscle development and a tendency to gain weight. The heads were broad, lips prominent, noses had a high convex bridge and curved pendulous tip. The chin and forehead were somewhat receding, eyes had a mongoloid cast with heavy lids and cheekbones were prominent. Skin color varied from medium to dark-brown, and the hair was black, straight to rarely wavy (Brainerd 9). A greater physical variability among the highlands Maya, the language diversity, and the historical accounts all suggest that they have been subject to much more outside influence than have the lowland peoples. (Robinson 2002) The Maya language is spoken by most Yucatecans. But many ÃŽ ¿f them do not speak Spanish. There is evidence ÃŽ ¿f impoverishment ÃŽ ¿f Maya vocabulary over the last 200 years, but the language is still in good form (Brainerd 10). In the warm climate ÃŽ ¿f the Maya area, clothing as protection from the elements had never been a necessity. Maya clothing was used as decoration and the most spectacular clothes were for the priest. The Maya personages wore large earplugs, necklaces, breastplates, ornaments attached to the nose, lips, waist, legs, arms, all were used for resplendent effect (Brainerd 68). Mayan peasants wore very little. The men had a simple loincloth or rather a band ÃŽ ¿f material that went once around their waist and then between their legs.